Product Description
4000W Bi-directional Inverter Charger
4000W continuous pure sine wave power and 8000W surge power
The max charging current of 12V 4000W is 120A
Ultra-clean pure sine wave power. With less than 3% total harmonic distortion.
The inverter will quickly switch between city power and battery power automatically.
When connected to shore power, power passes through the inverter directly to the loads and can be used to recharge batteries.
LED display shows the DC voltage, AC voltage, output power, battery capacity and some protection codes when the unit is in protection mode.
It includes CAN-BUS port, BTS port, program USB port, ignition port and remote port.
2 years warranty.
What you will get
A 4000w Bi-directional inverter charger and a user manual.
| SPECIFICATIONS |
12V model |
24V model |
48V model |
12V model |
24V model |
48V model |
| 120V model |
230V model |
| Inverter |
|
|
|
|
|
|
| Continuous AC Output Power |
4000W |
| AC Output Current |
33.3A max |
17.4A max |
| AC Surge Power (Peak) |
8000W |
| AC Output Voltage/Frequency |
110-130 VAC / 60 Hz |
|
220-240 VAC / 50 Hz |
| AC Output Waveform(THD) |
5% max ,2.5% typical |
| Nominal DC Input Voltage |
12.5 VDC |
25 VDC |
50 VDC |
12.5 VDC |
25 VDC |
50 VDC |
| DC Input Voltage operating range |
10.5 - 16.0 VDC |
21 - 32 VDC |
42 - 63 VDC |
10.5 - 16.0 VDC |
21 - 32 VDC |
42 - 63 VDC |
| Efficiency |
90% typical |
94% typical |
90% typical |
94% typical |
| AC Transfer Switch |
| Nominal AC transfer time - utility to inverter |
<30ms (delayed as required by voltage decay of active load) |
| Nominal AC transfer time - inverter to utility |
<20ms |
| Transfer Relay Rating |
40A |
20A |
| AC Input Source Setting |
15, 25, 35A |
10, 15, 20A |
| AC Output Port 1 (AC Socket) |
GFCI(20A) |
EU: CEE 7/4 (16A) |
| UK: BS1363 (13A) |
| AU: AS/NZS 3112 (10A) |
| AC Output Port 2 (Hard Wire Connector) |
40A max |
20A max |
| Display |
| Display Panel Port |
RJ12 |
| Inverter Mode |
Input Voltage, Output Power,Output Voltage |
| Charger Mode |
Status & Battery voltage,Input Power,Current |
| CANBUS Control |
By CANBUS |
| Remote Panel |
By Remote |
| Charger |
| Charger input operating range (full power) |
95-135Vac (105-130Vac) |
190-270 Vac (210-260Vac) |
| Charging Voltage Range |
13.5 - 14.8 VDC |
27-29.6V |
54-59.2V |
13.5 - 14.8 VDC |
27-29.6V |
54-59.2V |
| Charger Current (max) |
120A |
80A |
60A |
120A |
80A |
60A |
| Charger Current Setting |
20-120A |
10-80A |
10-60A |
20-120A |
10-80A |
10-60A |
| Battery Type |
Gel, Flooded, AGM, Lithium, use, Power Supply |
| Charge Control |
Bulk / Absorption / Float / Recharge |
| Maintenance Recharge Cycle |
7 days |
| Efficiency |
90% typical |
93% typical |
91% typical |
93% typical |
| Safety and Environmental |
| Approval |
cETLus |
CE |
| Safety |
UL 458, CSA C22.2 No. |
EN 60204-1 & IEC 61558-2-16 |
| 107.2-01 |
| EMC |
FCC Part 15 Class B |
EN 62040-2 Category C2 |
| Operating Temperature |
0°C to 50°C |
| Storage Temperature |
-20°C to 60°C (-4°F to 140°F) |
| Relative Humidity |
5-90% noncondensing |
| Operating Altitude |
Up to 9,843ft (3000m) above sea level |
| Weights and Dimensions |
| Weights |
8kg |
|
| Dimensions L X W X H |
433mm X 287mm X 110mm |
Detailed Photos
){kind=link}