E-MARK Approved 2500W Pure Sine Wave Inverter with Bypass with RCD for Australia

• Customization: Available
• Nature of Source Flow: Passive inverter
• Certification: ISO9001, CE, SAA, E-MARK, LVD, EMC
• Model NO.: YX-2.5KUS-RCD
• Output Power: 2500W
• Grid Type: off-Grid Inverter
• Output Type: Single
• Circuit Topologies: Full-Bridge Type
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Rated Power: 2500W
• Peak Power: 5000W
• Output Voltage: 220V/230V/240V
• Output Frequency: 50Hz/60Hz
• Warrenty: 18 Months
• Efficiency: 91%
• OEM: Accepted
• Display: LED Digital
• Output Waveform: Pure Sine Wave
• Relay Rating: 30A
• RCD Rating: 16A
• Transport Package: 1PC/Box; 4PCS/CTN
• Specification: 351x197x82mm
• Trademark: Yassion
• Origin: Zhejiang, China
• HS Code: 8504403090
• Production Capacity: 6000 PCS / Month

Product Description

Product Description

2500W Pure Sine Wave Inverter with Transfer Switch

Features:

1. 2500W continuous pure sine wave power and 5000W surge power
2. Ultra- clean pure sine wave power. With less than 3% total harmonic distortion.
3. The inverter will quickly switch between city power and battery power automatically with the included 30A transfer switch.
4. The inverter is lighter and more compact than others with similar power ratings because they use high-frequency switching technology in the power conversion process.
5. Digital display shows the DC voltage, AC voltage, output power and some protection codes when inverter is in protection mode.
6. Cooling fans is regulated.
7. Output voltage is selcectable
8. Output frequency is selectable.
9. 18 months warranty.

Protecion Features

• Over voltage and under voltage protection
• Over temperature and over load protection
• Short circuit and reverse polarity protection

What you will get
A 2500w pure sine inverter with transfer switch and a user manual.
 

Detailed Photos

Product Parameters

 

Model	YX-2.5KUS-1-1		YX-2.5KUS-2-1		YX-2.5KUS-1-2			YX-2.5KUS-2-2
Continuous Power	2500W
Peak Power	4900W
DC Voltage	DC12V		DC24V		DC12V			DC24V
AC Voltage	100VAC or 110VAC or 120VAC ±  5%                           (can be set by user )				220VAC or 230VAC or 240VAC ±  5%                    (can be set by user )
No Load Current Draws	1.3A		0.5A		1.3A			0.5A
Frequency	50HZ ± 0.5HZ or 60HZ ± 0.5HZ  (can be set by user )
Output Waveform	Pure Sine Wave
AC Regulation	THD<3% (Linear load)
Output Efficiency	12V:up to 89%;        24V:up to 91%
Max AC Input Current	20.8A				10.8A
Transfer relay rating	30A (resistive load)
Transfer time AC to inverter and inverter to AC	less than 30ms
AC Output Socket	EU / AU: 16A max; UK / US: 15A max
Low Voltage setting	The low voltage has four levels (Lo0, Lo1, Lo2,Lo3) to be set, it can meet different battery type.
Remote Control (Optional)	Remote control port is RJ12.  Cable length: 15m is available.
Power-Saving mode	The power saving mode will be activated when the output power is less than 15W. When output power is more than 20W, the inverter will automatically return to normal status.
Ignition Function	The Ignition Start Port is used for connecting to the ignition start signal from vehicles to control the operation of the inverter.
DC Input Protection
DC Voltage Range	10-15.5V				20-31V
Low Voltage Alarm	Lo0		11V		Lo0			22V
	Lo1		11.3V		Lo1			22.6V
	Lo2		11.8V		Lo2			23.6V
	Lo3		12.3V		Lo3			24.6V
Low Voltage Shut Down	Lo0		10.5V		Lo0			21V
	Lo1		10.8V		Lo1			21.6V
	Lo2		11.3V		Lo2			22.6V
	Lo3		11.8V		Lo3			23.6V
Low Voltage Alarm Recovery	Lo0		11.3V		Lo0			22.6V
	Lo1		11.6V		Lo1			23.2V
	Lo2		12.1V		Lo2			24.2V
	Lo3		12.6V		Lo3			25.2V
Low Voltage Protection Recovery	Lo0		12V		Lo0			24V
	Lo1		12.3V		Lo1			24.6V
	Lo2		12.8V		Lo2			25.6V
	Lo3		12.8V		Lo3			25.6V
Over Voltage Shut Down	15.7V		31.5V		15.7V			31.5V
Over Voltage Recovery	15.3V		30.6V		15.3V			30.6V
Protection Function
Low voltage alarm		code: F05	Buzzer sounds and fault light turns red
Low voltage shutdown		code: F01	Recover manually after the inverter shutdown. (The inverter will auto recover when the battery voltage goes back to a normal level within 20s.)
Over input voltage protection		code: F02	Recover manually after the inverter shutdown. (The inverter will auto recover when the battery voltage goes back to a normal level within 20s.)
Over load alarm		code: F06	Buzzer sounds and fault light turns red when output power is overloaded around 110%.  But the BUZZ and F06 code will not occur when the output power drops to a normal level within 20s.
Over load protection		code: F03	The inverter shutdown when output power is overloaded around 120%, it needs to be recovered manually.
Over temperature alarm		code: F07	Buzzer sounds and fault light turns red when the inverter's internal temperature is higher than the limit value (90±5ºC).
Over temperature protection		code: F04	The inverter will automatically return to normal status when the internal temperature drops to 80±5ºC.
		code: F08	The display will show the code F08 when the thermostats in the inverter is broken.
Short circuit protection		code:  F03	Manual recovery
Reverse polarity protection			Built-in fuse
AC input overload protection		code: F09	The fan will start to work when the relay temperature is up to 60±5ºC; but it will stop working when the relay temperature drops to 50±5ºC. The unit will alarm and no AC output when relay temperature is up to 75±5ºC; but it will auto recover when the relay temperature drops to normal value.
Fuse	Internal			USB port			5V, 2.1A
Working Temperature	-10°C--+50°C			Product Size			351x197x82mm
Storage Temperature	-30°C--+70°C			Packing Size			41x26x14cm
Warranty	18 months			N.W. / G.W. (KG)			4.5KG/5.2KG
Start	Bipolar soft-start			Quantity / Carton			4pcs
Cooling Way	Variable speed cooling fans			Carton Size			52x42x30cm
Certification	CE (LVD EMC), E-mark, FCC			Carton Weight			22.0KG

 

 

 

 

 

Company Profile